Menu
PROCORP offers CIPP (Cured-in-Place-Pipe) repair for trenchless rehabilitation of small-diameter pipes ranging from 4 to 64 inches in industrial, commercial and residential areas. This no-digging technology involves placing a special liner in damaged or broken pipes, effectively creating a new pipe within the old one. CIPP pipe repair, or uses a textile liner tube and a liquid resin to reline the damaged pipe.
PROCORP offers CIPP (Cured-in-Place-Pipe) repair for trenchless rehabilitation of small-diameter pipes ranging from 4 to 64 inches in industrial, commercial and residential areas. This no-digging technology involves placing a special liner in damaged or broken pipes, effectively creating a new pipe within the old one. CIPP pipe repair, or uses a textile liner tube and a liquid resin to reline the damaged pipe.
After cleaning the pipe and removing all debris, roots andcorrosion byproducts, the CIPP repair impregnates a flexible liner with a two-component resin system and places it inside the deteriorated pipe through existing manholes or accesspoints. The impregnated liner is inverted by means of hydrostatic water column and cured by circulation of hot water or inverted by means of air pressure and cured by controlled steam.
A new pipe is formed as the CIPP lining cures and hardens within the host pipe. Inspection and testing are performed to make sure the “new” pipe performs as expected, assuming all functions of the host pipe. The pipe-in-pipe solution is solely sustainable. Further, the “new” pipe bears all external loads without the support of the host pipe, providing a complete, structural solution.
PROCORP provides cost-effective CIPP installation for small & big diameter pipes in industrial, commercial and residential areas.
The CIPP system is an inversion system that allows you to repair pipes by relining them, as opposed to replacing them.
The existing pipe is cleaned and lined with a pre-cut, pre-measured felt liner. The liner is saturated in resin, inserted into the existing pipe, inflated and then cured to harden, taking the shape of the host pipe. The result is a fully rehabilitated reach.
PROCORP provides cost-effective CIPP installation for small & big diameter pipes in industrial, commercial and residential areas.
The CIPP system is an inversion system that allows you to repair pipes by relining them, as opposed to replacing them.
The existing pipe is cleaned and lined with a pre-cut, pre-measured felt liner. The liner is saturated in resin, inserted into the existing pipe, inflated and then cured to harden, taking the shape of the host pipe. The result is a fully rehabilitated reach.
A custom-designed liner tube is impregnated with epoxy and, based on the existing conditions, then inverted or pulled into the existing pipe. The liner materials are selected depending on the pipe condition. Standard liner tubes are used for straight pipes and more flexible tubes are used for pipes with severe bends, angles and transitions from smaller to larger diameters.
Resins are selected according to the job requirements and based on the inversion table. Once the resins are selected, the curing process can be done at ambient temperatures or by adding heat, which allows the curing process to be shortened to one hour.
PROCORP Trading &
Contracting Co.
P. O. Box: 45527, Doha.
+974 4037 0506
info@procorp.com.qa
All Rights Reserved. © 2022 PROCORP Trading & Contracting Co.
Design & Development by 